Wilson-Härteprüfblöcke sind der Branchenstandard und bestehen aus hochwertigsten Materialien, um einheitliche und reproduzierbare Prüfergebnisse zu gewährleisten. Wir bieten eine umfassende Palette an Skalen und Blöcken, um die mit Rockwell-, Brinell-, Knoop- und Vickers-Härteprüfungen verbundenen Anforderungen abzudecken. Alle Wilson-Prüfblöcke werden im Wilson-Härte-Kalibrierungslabor in Norwood, MA, kalibriert. Das Wilson-Labor ist von A2LA gemäß ISO/IEC 17025 zertifiziert, und die beim Kalibrierungsprozess verwendeten Prüfgeräte unterliegen einem strengen Überwachungsprozess, bei dem rückführbare NIST-Geräte verwendet werden.
Für die ultimative Präzision und Leistung bei der Überprüfung der Prüfgeräte sind Kalibrierungs-Sets für die meisten Rockwell-Skalen verfügbar.
- Wir arbeiten bei der Festlegung der chemischen Zusammensetzung direkt mit den Stahl- und Messingwerken zusammen.
- Unsere Bearbeitungsvorgänge (Schleifen, Läppen, Polieren) werden alle intern am Ort der Kalibrierung durchgeführt.
- 100%-ige Inspektion, um zu gewährleisten, dass jeder einzelne Prüfblock den physikalischen Anforderungen von ASTM entspricht (Dicke, Ebenheit, Parallelität, Oberflächenrauigkeit)
| Abmessungen des Blocks: | Ø 60 mm x 9 mm (Ø 2,4" x 0,35") |
| Gewicht des Blocks: | ±0,3 kg (0,66 lbs) |
| Zertifizierung: | Nach ISO 6508-3 und ASTM E18 |
| Das Buehler-Wilson Härte-Kalibrationslabor ist nach ISO/IEC 17025 von A2LA akkreditiert. | |
|---|---|
| HRA Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9201-030 | 22 | HRA | 20 | 24 |
| 9201-040 | 27 | HRA | 24 | 28 |
| 9201-050 | 31 | HRA | 28 | 32 |
| 9201-060 | 35 | HRA | 33 | 37 |
| 9201-070 | 40 | HRA | 37 | 41 |
| 9201-080 | 44 | HRA | 42 | 46 |
| 9201-090 | 50 | HRA | 47 | 51 |
| 9201-100 | 58 | HRA | 56 | 61 |
| 9201-110 | 63 | HRA | 61 | 65 |
| 9201-120 | 65 | HRA | 63 | 67 |
| 9201-130 | 68 | HRA | 66 | 70 |
| 9201-140 | 70 | HRA | 68 | 72 |
| 9201-150 | 73 | HRA | 71 | 75 |
| 9201-160 | 76 | HRA | 74 | 78 |
| 9201-170 | 78 | HRA | 76 | 80 |
| 9201-180 | 81 | HRA | 79 | 83 |
| 9201-190 | 83 | HRA | 81 | 85 |
| 9201-200 | 84 | HRA | 82 | 86 |
| 9201-210 | 87 | HRA | 85 | 89 |
| HRA Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 900990185 | 85 | HRA | 84 | 86 |
| 900990187 | 87 | HRA | 86.01 | 88.5 |
| 900990189 | 89 | HRA | 88.51 | 90.49 |
| 900990191 | 91 | HRA | 90.5 | 91.5 |
| 900990192 | 92 | HRA | 91.51 | 92.5 |
| 900990193 | 93 | HRA | 92.51 | 93.5 |
| HRB Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9202-010W | 0 | HRB | -5 | 5 |
| 9202-020W | 10 | HRB | 1 | 15 |
| 9202-030W | 20 | HRB | 15 | 25 |
| 9202-040W | 30 | HRB | 25 | 35 |
| 9202-050W | 40 | HRB | 35 | 45 |
| 9202-060W | 50 | HRB | 45 | 55 |
| 9202-070W | 60 | HRB | 55 | 65 |
| 9202-080W | 70 | HRB | 65 | 75 |
| 9202-090W | 80 | HRB | 75 | 85 |
| 9202-100W | 95 | HRB | 85 | 95 |
| HRB Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9202-020 | 10 | HRB | 1 | 15 |
| 9202-030 | 20 | HRB | 15 | 25 |
| 9202-040 | 20 | HRB | 25 | 35 |
| 9202-050 | 30 | HRB | 35 | 445 |
| 9202-060 | 50 | HRB | 45 | 55 |
| 9202-070 | 50 | HRB | 55 | 65 |
| 9202-080 | 70 | HRB | 65 | 75 |
| 9202-090 | 70 | HRB | 75 | 85 |
| 9202-100 | 80 | HRB | 85 | 95 |
| HRC Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9203-111 | 25 | HRC | 22.5 | 27.5 |
| 9203-121 | 30 | HRC | 27.5 | 32.5 |
| 9203-131 | 35 | HRC | 32.5 | 37.5 |
| 9203-141 | 40 | HRC | 37.5 | 42.5 |
| 9203-151 | 45 | HRC | 42.5 | 47.5 |
| 9203-161 | 50 | HRC | 47.5 | 52.5 |
| 9203-171 | 55 | HRC | 52.5 | 57.5 |
| 9203-181 | 60 | HRC | 57.5 | 62 |
| 9203-191 | 63 | HRC | 62.1 | 64.6 |
| 9203-201 | 65 | HRC | 64.6 | 68 |
| 9203-211 | 70 | HRC | 68 | 80 |
| HRD Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9204-110 | 44 | HRD | 42 | 46 |
| 9204-120 | 48 | HRD | 46 | 50 |
| 9204-150 | 59 | HRD | 57 | 61 |
| 9204-170 | 67 | HRD | 65 | 69 |
| 9204-180 | 71 | HRD | 69 | 73 |
| 9204-190 | 73 | HRD | 71 | 75 |
| 9204-200 | 75 | HRD | 73 | 77 |
| HRE Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9205-010 | 57 | HRE | 54 | 61 |
| 9205-020 | 63 | HRE | 59 | 65 |
| 9205-030 | 69 | HRE | 65 | 71 |
| 9205-040 | 75 | HRE | 72 | 78 |
| 9205-050 | 81 | HRE | 78 | 84 |
| 9205-060 | 87 | HRE | 84 | 90 |
| 9205-070 | 93 | HRE | 90 | 96 |
| 9205-080 | 99 | HRE | 96 | 102 |
| HRE Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9205-010W | 57 | HRE | 54 | 61 |
| 9205-020W | 63 | HRE | 59 | 65 |
| 9205-030W | 69 | HRE | 65 | 71 |
| 9205-040W | 75 | HRE | 72 | 78 |
| 9205-050W | 81 | HRE | 78 | 84 |
| 9205-060W | 87 | HRE | 84 | 90 |
| 9205-070W | 93 | HRE | 90 | 96 |
| 9205-080W | 99 | HRE | 96 | 102 |
| HRF Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9206-010 | 57 | HRF | 54 | 60 |
| 9206-020 | 63 | HRF | 60 | 66 |
| 9206-040 | 74 | HRF | 71 | 77 |
| 9206-050 | 80 | HRF | 76 | 82 |
| 9206-060 | 86 | HRF | 82 | 88 |
| 9206-070 | 91 | HRF | 88 | 94 |
| 9206-080 | 97 | HRF | 94 | 100 |
| HRF Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9206-010W | 57 | HRF | 54 | 60 |
| 9206-020W | 63 | HRF | 60 | 66 |
| 9206-030W | 69 | HRF | 65 | 71 |
| 9206-040W | 74 | HRF | 71 | 77 |
| 9206-050W | 80 | HRF | 76 | 82 |
| 9206-060W | 86 | HRF | 82 | 88 |
| 9206-070W | 91 | HRF | 88 | 94 |
| 9206-080W | 97 | HRF | 94 | 100 |
| HRG Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9207-070W | 17 | HRG | 12 | 23 |
| 9207-080W | 32 | HRG | 27 | 37 |
| 9207-090W | 49 | HRG | 44 | 54 |
| 9207-100W | 74 | HRG | 69 | 79 |
| 9207-110W | 87 | HRG | 82 | 92 |
| HRH Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9208-010W | 87 | HRH | 85 | 89 |
| 9208-020W | 91 | HRH | 88 | 92 |
| 9208-030W | 94 | HRH | 92 | 96 |
| 9208-040W | 98 | HRH | 96 | 100 |
| HRK Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9209-030W | 38 | HRK | 33 | 43 |
| 9209-040W | 47 | HRK | 42 | 52 |
| 9209-050W | 55 | HRK | 50 | 60 |
| 9209-060W | 65 | HRK | 60 | 70 |
| 9209-070W | 73 | HRK | 68 | 78 |
| 9209-080W | 81 | HRK | 76 | 86 |
| 9209-090W | 90 | HRK | 85 | 95 |
| HRL Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9210-010W | 105 | HRL | 100 | 110 |
| 9210-030W | 109 | HRL | 104 | 114 |
| 9210-050W | 113 | HRL | 108 | 118 |
| 9210-060W | 115 | HRL | 110 | 120 |
| 9210-070W | 117 | HRL | 112 | 122 |
| 9210-090W | 122 | HRL | 117 | 127 |
| 9210-100W | 125 | HRL | 120 | 130 |
| HRM Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9211-010W | 86 | HRM | 81 | 91 |
| 9211-020W | 90 | HRM | 85 | 95 |
| 9211-030W | 93 | HRM | 88 | 98 |
| 9211-050W | 101 | HRM | 96 | 106 |
| 9211-060W | 105 | HRM | 100 | 110 |
| 9211-070W | 108 | HRM | 103 | 113 |
| 9211-080W | 112 | HRM | 107 | 117 |
| 9211-090W | 116 | HRM | 111 | 121 |
| 9211-100W | 122 | HRM | 117 | 127 |
| HRR Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9216-020W | 114 | HRR | 104 | 124 |
| 9216-030W | 118 | HRR | 117 | 130 |
| HRS Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9217-010W | 101 | HRS | 80 | 106 |
| 9217-020W | 105 | HRS | 95 | 115 |
| HR15N Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9212-110 | 72 | HR15N | 70 | 74 |
| 9212-120 | 75 | HR15N | 73 | 77 |
| 9212-130 | 78 | HR15N | 76 | 80 |
| 9212-140 | 80 | HR15N | 78 | 82 |
| 9212-150 | 83 | HR15N | 81 | 85 |
| 9212-160 | 86 | HR15N | 84 | 88 |
| 9212-170 | 88 | HR15N | 86 | 90 |
| 9212-180 | 90 | HR15N | 88 | 92 |
| 9212-190 | 91 | HR15N | 89 | 93 |
| 9212-200 | 92 | HR15N | 90 | 94 |
| 9212-210 | 94 | HR15N | 92 | 96 |
| HR30N Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9213-110 | 46 | HR30N | 44 | 48 |
| 9213-120 | 50 | HR30N | 48 | 52 |
| 9213-130 | 55 | HR30N | 53 | 57 |
| 9213-140 | 60 | HR30N | 58 | 62 |
| 9213-150 | 64 | HR30N | 62 | 66 |
| 9213-160 | 69 | HR30N | 66 | 72 |
| 9213-170 | 73 | HR30N | 71 | 75 |
| 9213-180 | 78 | HR30N | 75 | 79 |
| 9213-190 | 80 | HR30N | 78 | 82 |
| 9213-200 | 82 | HR30N | 80 | 84 |
| 9213-210 | 86 | HR30N | 84 | 88 |
| HR45N Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9214-110 | 25 | HR45N | 22 | 28 |
| 9214-120 | 31 | HR45N | 28 | 34 |
| 9214-130 | 37 | HR45N | 34 | 40 |
| 9214-140 | 43 | HR45N | 40 | 46 |
| 9214-150 | 49 | HR45N | 46 | 52 |
| 9214-160 | 55 | HR45N | 52 | 58 |
| 9214-170 | 61 | HR45N | 58 | 64 |
| 9214-180 | 67 | HR45N | 64 | 70 |
| 9214-190 | 70 | HR45N | 68 | 72 |
| 9214-200 | 72 | HR45N | 70 | 74 |
| 9214-210 | 78 | HR45N | 73 | 78 |
| HR15T Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9218-020 | 64 | HR15T | 62 | 66 |
| 9218-030 | 67 | HR15T | 65 | 69 |
| 9218-040 | 71 | HR15T | 68 | 72 |
| 9218-050 | 74 | HR15T | 71 | 75 |
| 9218-060 | 77 | HR15T | 75 | 79 |
| 9218-070 | 80 | HR15T | 78 | 82 |
| 9218-080 | 84 | HR15T | 81 | 85 |
| 9218-090 | 87 | HR15T | 84 | 88 |
| 9218-100 | 92 | HR15T | 89 | 93 |
| HR30T Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9219-030 | 29 | HR30T | 25 | 31 |
| 9219-040 | 36 | HR30T | 33 | 39 |
| 9219-050 | 43 | HR30T | 40 | 46 |
| 9219-060 | 50 | HR30T | 46 | 52 |
| 9219-070 | 56 | HR30T | 53 | 59 |
| 9219-080 | 63 | HR30T | 59 | 65 |
| 9219-090 | 70 | HR30T | 67 | 73 |
| 9219-100 | 80 | HR30T | 77 | 83 |
| HR45T Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9220-060 | 23 | HR45T | 18 | 28 |
| 9220-070 | 34 | HR45T | 28 | 38 |
| 9220-080 | 43 | HR45T | 37 | 47 |
| 9220-090 | 53 | HR45T | 48 | 58 |
| 9220-100 | 67 | HR45T | 57 | 67 |
| HR15W Scale | ||||
|---|---|---|---|---|
| Certified with Tungsten Carbide Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9222-010W | 76 | HR15W | 74 | 78 |
| 9222-050W | 84 | HR15W | 82 | 86 |
| 9222-090W | 93 | HR15W | 90.5 | 94.5 |
| 9222-100W | 95 | HR15W | 93 | 97 |
| HR15Y Scale | ||||
|---|---|---|---|---|
| Certified with Steel Indenter | ||||
| Part Number | Hardness Value | Scale | Min | Max |
| 9228-020 | 90 | HR15Y | 87 | 93 |
| 9228-060 | 96 | HR15Y | 93 | 99 |
| Special Order Test Blocks | |
|---|---|
| The Wilson Hardness Calibration Laboratory is capable of special orders outside the standard product offering. The following item numbers should be used for special orders including specific hardness values, hardness ranges, engraving or other compliances. | |
| Part Number | Description |
| 9201-002 | Special Hardness or Range Request |
| 9201-003 | NADCAP Engraved Grid |
| 9201-006 | API Complaint Test Block |
-
Produktkatalog
Ansehen Download -
Härteprüfungs-Katalog
Ansehen Download - Test Block Application Guide
